Page Contents

Why is the Chip button grayed out/unclickable?

Why won't the terminal connect anymore?

What browsers can I use?

How can I use multiple terminals with my account?

Why didn't I get an approval? Did the transaction go through?

Why does the Swipe button say Port?

Why is the Chip button grayed out/unclickable?

After completing the installation (ID Tech Augusta - Setup & User Guide), there are several potential causes for the Chip button to be grayed out and unclickable. Check in this recommended order:

Browser cookies/cache/history may need to be cleared
You may not have admin rights enabled
Verify that the terminal is recognized by the computer
Driver may not be properly installed
May need to switch the browser using the system tray application
You may have an expired certificate
Certificate may not have been installed automatically

Browser cookies/cache/history may need to be cleared

For instructions on clearing the browser cookies/cache/history, click a link below:

Chrome: https://support.google.com/accounts/answer/32050?co=GENIE.Platform%3DDesktop&hl=en
Firefox: https://support.mozilla.org/en-US/kb/delete-cookies-remove-info-websites-stored under section titled "Delete all cookies"
Internet Explorer: https://kb.wisc.edu/helpdesk/page.php?id=12314
Edge: http://www.thewindowsclub.com/delete-browsing-history-cookies-data-edge

2. Close and reopen the browser.

3. Continue on number 3 in Step 2 in the Setup Guide here: ID Tech Augusta - Setup and User Guide#SetupandUserGuide-connectingtoplug-in

You may not have admin rights enabled

Installation of the CMS Integration services requires admin access for installation. If your computer does not have access to admin rights, you will need to obtain those prior to installation or the installation will not work properly. Once admin rights are enabled on the computer, uninstall all CMS software, restart your computer, and then re-download and re-install the software.

May need to switch the browser using the system tray application

The Augusta can be used in Chrome, Firefox, Internet Explorer, and Edge. By default, the installation will enable the terminal to be used in Chrome, Firefox, and Edge. To switch to Internet Explorer, follow the steps below:

Double-click on the CMS Service Manager icon on the desktop.
Click Yes to allow changes.
Click the arrow to show hidden icons.
Right-click on the CMS Online icon.
Select Browsers and select Internet Explorer.
A message will appear saying the switch to IE mode is complete.
Repeat the steps to switch back to Chrome/Firefox/Edge.

Expired Certificate

As of 5/14/18 one of the credentials needed to run the CMS Integration service expired and our updated software will need to be installed.

To do this, simply:

Uninstall the CMS Integration Service
Restart your computer
Download the CMS Integration Service from the link above (this link contains the newest version of the software)
Follow promptings to install the software.

Please note that in order to reinstall the software you will need admin access rights on your computer just as in the original installation- see Admin Rights Access.

Certificate may not have been installed automatically

The certificate normally installs automatically when running the CMS Terminal Integration Service installation.

To verify whether the certificate installed properly, follow the instructions below:

Type certmgr.msc in the search bar of the Start menu and hit Enter.
Go to Certificates>Trusted Root Certification Authorities>Certificates
Check whether CMS CA Cert appears in the Issued To column. If so, the certificate is properly installed.

If the certificate is not installed, follow the instructions below to install:

On the C: Drive, go to CMS Online>CMS Terminal Integration Service>ca.crt
Right-click on ca.crt and select Install Certificate.
Click Next.
Select Place all certificates in the following store and click Browse.
Select Trusted Root Certification Authorities and click OK.
Click Next.
Click Finish.

Continue on Step 3 in the Setup Guide here: ID Tech Augusta - Setup and User Guide#SetupandUserGuide-connectingtoplug-in

Why won't the terminal connect anymore?

If the terminal was previously connected/working but will no longer connect, try the following:

Browser cookies/cache/history may need to be cleared.

The terminal will sometimes become disconnected from the plug-in if it is unplugged from the computer and plugged into a different USB Port.

Verify that the terminal is recognized by the computer.

The USB Port may have an issue preventing the computer from recognizing the terminal.
The CMS Service Manager may need to be restarted. Type 'CMSServiceManagerSysTray.exe' into the search bar of the Start menu, then double-click the file to run the program.

What browsers can I use?

The Augusta can be used in Chrome, Firefox, Internet Explorer, and Edge. By default, the installation will enable the terminal to be used in Chrome, Firefox, and Edge. For instructions on switching to Internet Explorer, click here.

How can I use multiple terminals with my account?

If the account is set up to have multiple terminals connected, follow the instructions below:

Plug in the terminal to be used.
Load the plug-in.
You will be prompted to select the serial number from the back of the terminal in the displayed dropdown. Note that the serial number on your device will not include the preceding "A" or the colon (:).
Click Proceed and continue with the transaction as normal.

If using a different terminal with the same computer, use the button pictured here to disconnect the current terminal and connect a different terminal. Note that unpairing the device will clear the browser cookies.

Once the terminal is unpaired, the user will again be prompted to select a serial number. After selecting the serial number, you may need to close and reopen Slyce plug-in to get the terminal to connect.

Why didn't I get an approval? Did the transaction go through?

If no approval was displayed, or if the transaction does not show in your software reports:

Log in to Slyce Gateway here using your CMV credentials: https://www.slycegateway.com/login
Click on Reports in the left-side menu.
Click on Transactions.
By default, transactions for today should be shown. If the transaction appears here, it was processed correctly.

To investigate the cause of the issue, please contact your software provider who will determine whether CMS support will need to be contacted.

Browser not supported